702 series remote power controllers up to 200 amps form x magne tic latching for ac and dc applications specifications general contact arrangement ........................... spst (1 form x) weight ................................................... ............ 15 oz max. designed to meet the requirements of mil - c - 83383 performance contac t ratings (note 1): power contacts: all loads ................... up to 200 amps @ 28 vdc or 115/208v 400 hz current trip points .................................... trip time 1000% of rated current .................... 1.0 sec. max. 400% of rated current ..................... 10.0 sec. max. 200% of rated current ..................... 60.0 sec. max. 138% of rated current ...................... 1.0 hour max. up to 115% of rated current ....................... no trip tolerances: current ................................................... .......... 10% time ................................................... .............. 10% auxiliary contacts: configuration ................................................... spdt current rating ........................... 5 amps @ 28 vdc life ............... 50,000 cycles @ rated res. and ind. load 25,000 cycles @ rated motor load 100,000 cycles mechanical rupture (main contacts) .......................... 3600 amperes response time: ............................................. 12 ms nom. contact bounce time ....................................... 2 ms max @ rated contact load, 115 vac contact voltage drop : initial ...................................... 225 mv @ rated current end of life ............................. 250 mv @ rated current operating voltage: nomi nal ac voltage ............................ 104 to 122 vac nominal dc voltage................................ 18 to 32 vdc environmental temperature range ................................. - 54 o c to +71 o c vibration (note 2) .............................. 10 g's 50 - 2000 hz shock (operating) (note 2) ......................... 25 g's 11 ms acceleration ................................................... ............ 15 g electrical characteristics duty cycle ................................................... ..... intermitten t insulation resistance ............................... 100 megohms @ 500v 25 o c dielectric strength: sea level: contact to case ................................... 1,500 vrms contact to coil ..................................... 1,500 vrms coil to case ......................................... 1,500 vrms across open contacts ........................ 1,350 vrms 50,000 feet: all points ................................................. 500 vrms notes: 1. for other rati ngs or calibrations consult the factory. 2. for applications requiring higher shock and vibra tion, consult the factory. 14930 e. alondra blvd., la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w:2000, rev. 4 downloaded from: http:///
702 series the 702 remote power controllers are designed to se nse the current level flowing through their contact s, and to open the circuit when the current exceeds the specified current rati ng. these units use our unique magnetic l atching motor design to minimize power consumption. these units are fully temperatu re compensated for accurate operation over the full temperature range. the 702 circuitry has 1500 watts of peak power diss ipation transient suppression built in so it can withstand the rigors of even the noisiest of supply voltages. utilizing all space a ge approved materials, the 702 remote power control lers are ideal for demanding applications. r.p.c. type nominal current rating "a" indicates spdt auxiliary switch 702 - 150 a overall dimensions selection table catalog number conti nuous ampere contact rating thread "b" dimension "a" 702 - 5( ) 5 10 - 32 unf .500 702 - 7.5( ) 7.5 10 - 32 unf .500 702 - 10( ) 10 10 - 32 unf .500 702 - 15( ) 15 10 - 32 unf .500 702 - 20( ) 20 10 - 32 unf .500 702 - 25( ) 25 10 - 32 unf .500 702 - 35( ) 35 1/4 - 28 unf .610 702 - 40( ) 40 1/4 - 28 unf .610 702 - 50( ) 50 1/4 - 28 unf .610 702 - 60( ) 60 1/4 - 28 unf .610 702 - 75( ) 75 1/4 - 28 unf .610 702 - 100( ) 100 1/4 - 28 unf .610 702 - 125( ) 125 1/4 - 28 unf .610 702 - 150( ) 150 1/4 - 28 unf .610 702 - 175( ) 175 1/4 - 28 unf .610 702 - 200( ) 200 1/4 - 28 unf .610 schematic typical wiring diagram trip time curve general note s unless otherwise specified, all tests made at nomin al coil voltages, @ 25 o c. for special coil variations, switching configuratio ns, terminals styles and mounting types, consult the factory. unless otherwis e specified, tolerances on decimal dimensions are .010". specifications contained herein are subject to chan ge without notice. s 14930 e. alondra blvd., la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w:2000, rev. 4 downloaded from: http:///
|
